

The Schneider Electric 81483 PratiKa is a low-voltage industrial mobile socket designed for high-current three-phase electrical connections in professional and industrial environments. It features a 3P+N+T configuration, a rated current of 63 A and an operating voltage of 380-415 V AC, with red voltage identification and a protective earth contact clock position of 6h. Its IP67 protection rating and IK08 mechanical resistance make it suitable for installations where a robust connection protected against dust, water and impacts is required.
The socket has a straight design and uses captive screw connection. It is suitable for conductors from 6 to 25 mm² and cables with an outer diameter of 17 to 31 mm, incorporating a Pg 36 cable entry. Its enclosure is made of self-extinguishing technical polymer and complies with IEC 60309-1 and IEC 60309-2 standards for industrial plugs and sockets.
The Schneider Electric 81483 features a five-contact configuration: three phases, neutral and earth. This 3P+N+T arrangement makes it suitable for 380-415 V three-phase installations that require both a neutral conductor and earth protection.
The rated current of 63 A allows it to be used in equipment and lines that require a considerably higher connection capacity than standard 16 A or 32 A industrial sockets.
Electrical characteristicValueRated current63 ANumber of poles3P+N+TOperating voltage380-415 V ACFrequency50/60 HzClock position6hThe industrial socket offers an IP67 protection rating in accordance with IEC 60529. This classification provides a high level of protection against dust ingress and against water penetration under the test conditions established by the standard.
For this reason, the PratiKa 81483 is especially suited to professional installations where a conventional socket would not provide a sufficient level of protection.
To preserve the IP67 rating, correct installation, cable connection and closure of all sealing elements must be carried out in accordance with Schneider Electric instructions.
In addition to IP67 environmental protection, the socket has an IK08 impact resistance rating in accordance with EN 62262. This feature improves its suitability for industrial installations, workshops, temporary installations and other spaces where connectors may be exposed to knocks during use.
The IEC 60309 industrial connector standard uses colors and clock positions to make it easier to identify different voltages and prevent incorrect connections.
In this reference, the 380-415 V AC voltage is identified by red color and the protective contact is positioned at 6h. This coding helps ensure mechanical compatibility with industrial plugs that have the same electrical configuration.
The Schneider Electric PratiKa 81483 uses captive screw terminals for conductor connection. The screws remain integrated into the mechanism, simplifying wiring operations and preventing them from being lost during installation.
The socket accepts conductors with cross-sections between 6 and 25 mm², allowing the cable to be selected according to design current, line length, installation method and environmental conditions.
Connection featureValueConnection systemCaptive screwsConductor cross-section6-25 mm²Cable outer diameter17-31 mmEntry typeCable glandThreadPg 36Reference 81483 corresponds to a straight mobile socket. It is designed to be mounted at the end of a flexible cable and to make detachable connections with a compatible industrial plug.
Therefore, it is not a fixed flush-mounted or surface-mounted wall socket, but a mobile socket intended mainly for extension leads, power cables and portable connections for machinery or equipment.
The housing is made of self-extinguishing technical polymer, a material suitable for industrial electrical equipment due to its combination of electrical insulation, mechanical strength and heat resistance.
Schneider Electric specifies a fire resistance of 850 °C in accordance with IEC 60695-2-1.
The conductive and mechanical components of the socket use materials selected to provide reliable electrical connection and resistance to continuous use.
The nickel-plated finish of the conductive elements helps maintain suitable contact conditions during connector use.
Due to its 63 A rated current and capacity for conductors up to 25 mm², the socket has larger dimensions than 16 A and 32 A industrial formats.
DimensionValueWidth110 mmHeight110 mmDepth / length265 mmApproximate net weight0.783 kgThe main enclosure has a grey RAL 7035 finish, while the voltage identification element is red. This combination makes it easy to quickly recognize the 380-415 V voltage family commonly used in industrial three-phase installations.
The socket is designed to operate in environmental conditions typical of industrial and professional installations. Schneider Electric specifies an operating ambient temperature range of -25 to +40 °C, together with specific relative humidity conditions.
Environmental conditionValueOperating temperature-25 to +40 °CRelative humidity at 40 °C50 %Relative humidity at 30 °C70 %Relative humidity at 20 °C90 %The Schneider Electric 81483 is manufactured in accordance with IEC 60309-1 and IEC 60309-2, which are specific to plugs, socket outlets and couplers used in industrial applications.
These standards regulate aspects such as mechanical configuration, rated current, voltage, clock position, color coding and construction requirements for industrial connectors.
With its 63 A rating, three-phase configuration with neutral and earth, and IP67 protection, this PratiKa socket is intended for professional electrical connections that require robustness and high environmental protection.
For a correct connection, the socket must be used with a compatible industrial plug rated at 63 A, 3P+N+T, 380-415 V and 6h position. Matching current rating, voltage, number of poles and clock position is essential to ensure mechanical and electrical compatibility.
Conductor sizing, overcurrent protection and other installation elements must be selected according to the connected load and applicable electrical regulations.
The Schneider Electric PratiKa 81483 is a 63 A industrial mobile socket especially suitable for 3P+N+T three-phase 380-415 V connections. Its IP67 rating, IK08 resistance, captive screw connection, capacity for conductors up to 25 mm² and IEC 60309-compliant construction provide a robust solution for machinery, extension leads and professional electrical equipment.