

The Schneider Electric LVSXL224 PrismaSeT XS is a surface-mounted modular enclosure for electrical distribution boards, equipped with 2 rows of 24 modules of 18 mm, providing a total capacity of 48 modules. It is supplied with a smooth white RAL 9003 door, two removable DIN rails and a earth terminal block, offering a complete solution for residential and tertiary electrical installations.
The enclosure combines technoplastic and metal elements, supports a rated current of up to 125 A and features class II electrical insulation. With the door closed, it achieves a protection rating of IP40 and IK09, while its removable cable entries and removable DIN rails make installation, wiring and maintenance easier.
The LVSXL224 features 2 horizontal rows with capacity for 24 modules of 18 mm each. Therefore, the total modular capacity of the board is 48 modules.
ConfigurationValueNumber of rows2Modules per row24Width of each module18 mmTotal capacity48 modules9 mm steps96This capacity allows for different combinations of modular devices such as miniature circuit breakers, residual current devices, modular contactors, surge protection devices, control devices and other DIN rail compatible components.
The PrismaSeT XS LVSXL224 is designed for surface wall mounting. Unlike flush-mounted enclosures, it does not require a full recess in the wall to house the board.
This type of installation is especially practical in technical rooms, garages, tertiary installations, renovations and other spaces where the aim is to simplify installation or keep the board accessible on the wall surface.
This reference is supplied with a smooth, opaque white RAL 9003 door, which conceals the installed devices and provides a clean finish for residential and tertiary environments.
The white color is also applied to the main front elements of the assembly, making it easier to integrate visually into walls and indoor spaces.
The PrismaSeT XS enclosure has a base protection rating of IP30. In this reference, supplied with a door, the assembly reaches IP40 with the door closed according to the configuration indicated by Schneider Electric.
The IP40 rating provides protection against access with solid objects larger than 1 mm and is intended for indoor installations protected from water.
With the door closed, the LVSXL224 offers IK09 impact resistance. This classification provides high robustness against accidental mechanical impacts typical of installation and maintenance environments.
ProtectionValueBase enclosure protectionIP30Protection with door closedIP40Impact resistanceIK09 with door closedThe enclosure is designed for distribution boards with a rated current of up to 125 A, allowing larger-capacity installations than conventional small residential boards.
The final permissible current of the board also depends on the devices, internal distribution, conductors, temperature, heat dissipation and the complete installation configuration.
The PrismaSeT XS LVSXL224 features class II electrical insulation. This construction uses reinforced insulation or double insulation to increase protection against electric contact.
Electrical characteristicValueRated current InUp to 125 ARated insulation voltage Ui400 VInsulation classClass IIOvervoltage categoryIIThe enclosure incorporates 2 symmetrical DIN rails, one for each row of modular devices. The rails are removable, a feature designed to improve ergonomics during mounting and wiring operations.
The installer can remove the rail to prepare part of the assembly more comfortably and then reinstall it in the enclosure.
The LVSXL224 includes a earth terminal block with 24 outputs, making it easier to distribute protective conductors inside the board.
Earth connectionsCapacityLarger cross-section connections3 x 25 mm²Additional connections21 x 4 mm²Total outputs24The effective permitted cross-section depends on the type of conductor and the conditions specified for the terminal block.
The enclosure can house a compatible 24-module Acti9 VDIS vertical distributor. This option makes it easier to distribute power between the different rows and protections installed in boards that require a more organized distribution architecture.
PrismaSeT XS is designed to simplify cable entry and routing. The enclosure incorporates removable plates and entry zones to facilitate conductor entry from different directions.
Schneider Electric highlights cable entry options from the top, bottom and side, depending on the board configuration.
The system allows the entry to be adapted for different wiring methods, including:
The PrismaSeT XS range has been developed with special attention to installer ergonomics. The removable DIN rails, removable entries and available internal space make it easier to route, connect and organize conductors.
These features also simplify later expansions, checks and maintenance operations on the installed devices.
The LVSXL224 has an internal depth of 155 mm, providing space to house modular devices and organize rear wiring.
DimensionValueExternal width550 mmExternal height450 mmExternal depth168 mmInternal depth155 mmThe enclosure uses a combination of technoplastic and metal. The body and front elements use technoplastic, while certain structural parts, such as the rear section and the door, incorporate metal construction.
This combination provides a robust structure while maintaining the insulation properties required for the PrismaSeT XS range.
The enclosure's technoplastic components are designed to withstand the thermal conditions typical of distribution boards. Technical documentation indicates abnormal heat and fire resistance of 650 °C for the corresponding plastic elements.
For this configuration, a reference thermal dissipation capacity of approximately 67 W is declared. This data is especially relevant when designing boards with a large number of heat-generating devices.
The final internal temperature depends on the installed load, equipment losses, ambient temperature and the board's ventilation conditions.
The enclosure is designed to operate in an ambient range between -25 and +60 °C, offering sufficient margin for most residential and tertiary indoor electrical installations.
The LVSXL224 configuration is delivered ready to facilitate board assembly and includes the main elements needed to organize modular devices.
With its 48-module capacity and rated current of up to 125 A, the LVSXL224 is suitable for medium-sized electrical boards in different types of buildings.
The enclosure is designed to house standard 18 mm modular devices on DIN rail. Depending on the board design, it can include elements such as:
The PrismaSeT XS LVSXL224 is developed in accordance with applicable standards for low-voltage enclosures and distribution assemblies, including:
The Schneider Electric PrismaSeT XS LVSXL224 is a high-capacity surface-mounted modular enclosure for residential and tertiary installations. Its 48 modules distributed across 2 rows of 24, white RAL 9003 door, rated current up to 125 A, IP40/IK09 protection, class II insulation, removable DIN rails and included earth block provide a practical and flexible solution for creating professional electrical distribution boards.