Samsung EHS HT Quiet 8 kW Monobloc R32 Air Source Heat Pump - Three Phase

The Samsung EHS Mono HT Quiet 8 kW Three-Phase is a monobloc air-to-water heat pump designed for renovation and new construction projects that require greater electrical stability in three-phase installations. It provides heating, cooling, and domestic hot water in a single compact outdoor unit, offering high performance and reduced noise levels.

Its monobloc design simplifies installation by integrating the refrigeration circuit into the outdoor unit, making hydraulic connection in the technical room easier.

Water up to 70 °C for Boiler Replacement

It can reach up to 70 °C supply temperature, making it an ideal solution for replacement projects where existing radiators are retained. It maintains performance even in cold climates thanks to its advanced compression technology.

• Heating capacity (A7/W35): 8.0 kW.
• Cooling capacity (A35/W18): 8.0 kW.
• Heating water outlet temperature: 15 ~ 70 °C.
• Cooling water outlet temperature: 5 ~ 25 °C.
• Heating operating range: -30 ~ 43 °C.
• Cooling operating range: 10 ~ 46 °C.

Certified Silent Operation

The HT Quiet range is optimized to minimize acoustic impact in residential environments.

• Sound pressure in normal mode: 42 dB(A).
• Sound pressure in silent mode: 35 dB(A).
• Fan with optimized geometry to reduce turbulence.
• Double-layer internal insulation in the compressor.
• Anti-vibration pads and reinforced structure.
• Quiet Mark certification (EU and UK).

Efficiency and R32 Refrigerant

Equipped with R32, it optimizes refrigerant quantity and improves the balance between efficiency and sustainability compared to previous technologies. Incorporates Advanced Flash Injection, allowing it to maintain thermal capacity even at very low outdoor temperatures.

Durability and Anti-Corrosion Protection

• Durafin™ Ultra heat exchanger with anti-corrosive and hydrophilic coating.
• Galvanized steel sheet with powder coating up to 100 µm.
• Anti-freeze control that activates preventive pumping when necessary.
• Structural design prepared for demanding outdoor conditions.

Design and SmartThings Integration

Premium dark finish for easy integration on facades or terraces. Compatible with Samsung SmartThings for remote control (requires optional Wi-Fi kit and active account).

Coverage Guidance by Thermal Load

The heatable area depends on the building’s insulation and thermal calculation. As a reference:

• 30–40 W/m² → approximately 100–130 m² (high insulation).
• 50–60 W/m² → approximately 65–80 m² (medium insulation).
• 80–100 W/m² → approximately 40–50 m² (low insulation).

Indicative values that must be confirmed by thermal load calculation.

Technical Specifications

• Model: AE080BXYDGG/EU.
• Type: Monobloc air-to-water heat pump.
• Heating capacity (A7/W35): 8.0 kW.
• Cooling capacity (A35/W18): 8.0 kW.
• Heating water outlet temperature: 15 ~ 70 °C.
• Cooling water outlet temperature: 5 ~ 25 °C.
• Sound pressure (normal): 42 dB(A).
• Sound pressure (silent mode): 35 dB(A).
• Heating operating range: -30 ~ 43 °C.
• Cooling operating range: 10 ~ 46 °C.
• Power supply: 3Φ, 380 ~ 415 V.
• Refrigerant: R32.
• Hydraulic connections inlet/outlet: 28/28 mm.
• Dimensions (W x H x D): 1270 x 1018 x 530 mm.

Installation Considerations

• Requires three-phase electrical supply 380 ~ 415 V.
• Hydraulic and electrical sizing according to project.
• Remote control available via optional Wi-Fi kit.