Samsung EHS HT Quiet 14 kW Monobloc R32 Air Source Heat Pump - Single Phase

The Samsung EHS Mono HT Quiet 14 kW is a high-power monobloc air-to-water heat pump designed for energy retrofitting and homes with higher thermal demand. It provides heating, cooling, and domestic hot water in a single compact outdoor unit, combining high performance, premium design, and low noise levels.

Its monobloc configuration simplifies hydraulic installation by integrating the refrigeration circuit into the outdoor unit, making commissioning easier for residential projects.

High Power and Water up to 70 °C

This model can reach up to 70 °C supply temperature, making it an ideal solution for boiler replacement in installations with existing radiators. It maintains a stable supply even under demanding weather conditions.

• Heating capacity (A7/W35): 14.0 kW.
• Cooling capacity (A35/W18): 14.0 kW.
• Heating water outlet temperature: 15 ~ 70 °C.
• Cooling water outlet temperature: 5 ~ 25 °C.
• Heating operation range: -30 ~ 43 °C outdoor.
• Cooling operation range: 10 ~ 46 °C outdoor.

Certified Quiet Operation

The HT Quiet range features specific noise reduction solutions to enhance comfort in residential environments.

• Sound pressure in normal mode: 47 dB(A).
• Sound pressure in silent mode: 35 dB(A).
• Fan with optimized geometry to reduce turbulence.
• Double-layer internal insulation in the compressor.
• Anti-vibration pads and reinforced structure to minimize resonance.
• Quiet Mark certification (EU and UK).

Energy Efficiency and Advanced Technology

Equipped with R32 refrigerant, the unit optimizes the required refrigerant amount and improves the balance between efficiency and sustainability. It features advanced technologies such as Advanced Flash Injection, which maintains thermal performance even at very low outdoor temperatures.

Durability and Outdoor Resistance

Designed to withstand harsh weather conditions, it integrates protection solutions against corrosion and ice.

• Durafin™ Ultra heat exchanger with anti-corrosive and hydrophilic coating.
• Galvanized steel sheet with powder coating up to 100 µm.
• Anti-freeze control with preventive pump activation.
• Reinforced structure for greater durability.

Smart Design and Integration

Its premium dark finish allows for aesthetic integration on facades, terraces, or patios. Compatible with Samsung SmartThings for remote control (requires optional Wi-Fi kit and active account).

Coverage Guidance by Thermal Load

The heatable area depends on the building's thermal calculation. As a reference:

• 30–40 W/m² → approximately 100–130 m² (high insulation).
• 50–60 W/m² → approximately 65–80 m² (medium insulation).
• 80–100 W/m² → approximately 40–50 m² (low insulation).

Indicative values that must be validated by thermal load calculation.

Technical Specifications

• Model: AE140BXYDEG/EU.
• Type: Monobloc air-to-water heat pump.
• Heating capacity (A7/W35): 14.0 kW.
• Cooling capacity (A35/W18): 14.0 kW.
• Heating water outlet temperature: 15 ~ 70 °C.
• Cooling water outlet temperature: 5 ~ 25 °C.
• Sound pressure (normal): 47 dB(A).
• Sound pressure (silent mode): 35 dB(A).
• Heating operation range: -30 ~ 43 °C.
• Cooling operation range: 10 ~ 46 °C.
• Power supply: 1Φ, 220 ~ 240 V.
• Refrigerant: R32.
• Hydraulic connections inlet/outlet: 28/28 mm.
• Dimensions (W x H x D): 1270 x 1018 x 530 mm.

Installation Considerations

• Hydraulic and electrical sizing according to project.
• Check available contracted power for single-phase installation.
• Remote control via optional Wi-Fi kit.